Quickie Pulse Manual de Serviço descarregar pdf (Página 26)

PULSE 6 SERVICE MANUAL

PAGE 3.2

2009SUNRISE MEDICAL

Section 3

Check that the batteries are fully charged and in good

condition; and check all cables and connections. Check

the connections to the left motor, look for a loose or

damaged

connector.

Measure the resistance from the bottom contact of the

red thick wire on the 4-pin left motor connector to each

of the top contacts of the connector (figure A3.3.1).

Measure the resistance from the bottom contact of the

black thick wire on the 4-pin left motor connector to

each of the top contacts of the connector see (below

right). If all of the readings are open, then replace the

controller. If any of the readings are short, then replace

the left motor.

Three Bars - Left Motor Wiring Trip)

A3.3.1

Test 1

Test 2

Test 3

Test 4

VR2 Controller Diagnostics Codes (cont.)

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 61 62

Sem comentários

Quickie Pulse Manual de Serviço Página 26