Quickie Pulse Manual de Serviço descarregar pdf (Página 45)

PULSE 6 SERVICE MANUAL

PAGE 6.1

2009SUNRISE MEDICAL

Note: This procedure may be done with or without removing the motor from the power chair.

If the motor/gearbox is to be removed from the power chair, refer to the Motor and Gearbox

Removal section of this manual.

Consider replacing any motor/gearbox assembly that does not pass the following test. Refer

to the Motor Gearbox Removal section of this manual.

1. Inspect the output shafts for signs of grease

leakage (ﬁ g. 6.1).

2. Inspect the cotter pin connecting the

gearbox release arm to the motor/gearbox

assembly. Ensure that it is tight and not damaged

(ﬁ g. 6.2)

3. Manually operate each gearbox release

lever to ensure that they operate easily and fully

engage and disengage

Note: When removing the brush assemblies,

remove one brush assembly at a time. Note its

orientation so that it can be inserted into the

brush holder the same way it was removed.

Caution: Use care not to damage the brush

cap with excessive force in the next step.

4. Remove the brush by using a common

screwdriver to unscrew the cap (ﬁ g. 6.1).

Motor/Gearbox Inspection

Section 6

fig. 6.1

fig. 6.2

fig. 6.3

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 61 62

Sem comentários

Quickie Pulse Manual de Serviço Página 45