Quickie Pulse Manual de Serviço descarregar pdf (Página 31)

PULSE 6 SERVICE MANUAL

PAGE 4.2

2009SUNRISE MEDICAL

Section 4

5. Disconnect the power connector from the

control module, and use a Multimeter to check

for battery voltage at the connector (fig4.3). If

voltage is present, replace the control module.

Retest as necessary.

Note: The power connector is the larger 2-pin

connector between the left and right motor

cable.

6. Manually tilt the seat back and remove the

shroud from the base. Refer to Battery Removal

section of this manual.

7. Verify that the circuit breaker located at

the front of the power chair is not tripped (fig 4.4).

Reset if it is tripped and retest.

8. Disconnect the batteries (fig 4.5).

Rnet Troubleshooting Procedures

fig. 4.3

fig. 4.4

fig. 4.5

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 61 62

Sem comentários

Quickie Pulse Manual de Serviço Página 31