Quickie Pulse Manual de Serviço descarregar pdf (Página 67)

PULSE 6 SERVICE MANUAL

PAGE 8.1

SEPT 2011SUNRISE MEDICAL

ASAP II Seating 16” - 20” wide is shown.

(NOTE: The same procedure is used for 18”- 22”

wide seating system)

The ASAP II seating system is fully adjustable to

allow changes from 16” to 20” or 18” – 22”. This

requires a frame weldment and seat pan plates

adjust for seat growth. The pictures shown in

(figure 8.1.1) shows a 20” wide seat width . This

detail shows how easy it is to change back to

16” wide.

To make seating width adjustments follow the

following steps:

1. Have 3mm – 4mm – and 5mm Allen Hex

keys available for the adjustments.

2. Loosen (do not remove) the front M8 Button

Head Cap bolt "A" (figure 8.1.1). with a 4mm

Hex key, or a T-handle Hex key so that the

plates can slide for adjustment.

3. Using a 3mm Hex key, remove the socket

head cap screws (figure 8.1.2) that attach the

left and right wings to the seat frame.

4. Remove the 5mm socket head bolts with a

Hex key that are used to hold bottom seat in

place (figure 8.1.3) – totally remove out of its

position.

Seat/Back Width adjustment

Section 8

fig. 8.1.1

fig. 8.1.2

fig. 8.1.3

A

1 2 ... 62 63 64 65 66 67 68 69 70 71 72

Comentários a estes Manuais

Sem comentários