Quickie Pulse Manual de Serviço descarregar pdf (Página 70)

PULSE 6 SERVICE MANUAL

PAGE 8.4

SEPT 2011 SUNRISE MEDICAL

Legrest adjustment

1. To perform a Legrest adjustment (figure

8.4.1) the following tools are required: A 5mm

Hex Key, and a 13mm open end wrench and/or

ratchet.

Section 8

fig. 8.4.1

fig. 8.4.2

fig. 8.4.3

fig. 8.4.4

2 Loosen all 3 sets of bolts/nuts as shown in

(figure 8.4.2) and (figure 8.4.3) using the 5mm

hex key and 13mm open-end wrench or ratchet.

3. There are 5 sets of holes as seen from the

front bars and 6 sets of holes as seen on on

(figure 8.4.4) where bolts can go through to give

adjustability of up to 6 inches from top to bottom.

To extend the front arms further, simply loosen

5mm size SHCS screws and move the bars

further forward, then retighten.

4. Once desired height is achieved, Reset

placement of bolts then tighten with 5mm Hex

key and 13mm wrench. Tighten to 40 in/lbs of

torque.

1 2 ... 65 66 67 68 69 70 71 72

Sem comentários

Quickie Pulse Manual de Serviço Página 70